Management of excess energy in a photovoltaic/grid system by production of clean hydrogen

In this article, the authors design a new clean storage device for a photovoltaic system (PV) reinforced by the electrical grid. The photovoltaic system supplies power to a DC load. When the power of the photovoltaic source is insufficient, the electrical grid compensates the energy deficit. On the other hand, if the load is satisfied and the PV source is still able of supplying energy, the energy excess is diverted to an own storage unit materialized by an electrolysis which produces gaseous hydrogen by the process of electrolysis of water. The authors show that the quantity of hydrogen produced is proportional to the photovoltaic energy excess and also to the flow of water injected into the electrolysis. In this case, it is a question of designing an electrolysis with specific characteristics, which takes into account the quantity of energy excess and the flow of water injected into it. The authors abandon the idea of controlling the water flow by means of a pumping-electrovalve system, and initiate the idea of replacing the function of the pump by the action of gravity. The work focuses on the development of an electrolysis optimization approach using the water flow control in its alliance with the PV power excess which is also maximized. For an optimized use of the global system (load and electrolysis), the authors present an architecture based on energy-converting structures (DC/DC and AC/DC). In addition, to increase the reliability and safety of the system, the authors finish by developing a power management strategy (PMS) in the designed system. This power management strategy organizes the energy flow and selects the appropriate path of this flow between the two energy sources (PV and electrical grid) and the two possible energy receivers (load and electrolysis). A complete modeling of the system is developed in the Matlab/Simulink environment. The simulation results show that the hybrid system (PV and electrical grid) is able to permanently supplying the load and potentially storing the excess of the PV energy in the form of hydrogen gas.     

钠水反应试验系统中小泄漏钠水反应氢气分布特性

蒸汽发生器是钠冷快堆的关键设备之一，其传热管破裂引发的钠水反应会产生大量氢气及热量，危害钠冷快堆的安全运行。本文基于VOF多相流模型，在钠水反应试验系统内开展中小泄漏钠水反应工况的数值分析，获得了高压反应釜内氢气在钠水反应下的三维空间分布特性和迁移特性。结果表明：高压反应釜内氢气的迁移特性受钠液流速影响，氢气在整个循环环路的迁移特性主要受水泄漏量控制。通过设置灵敏度为0.005 ppm的氢计，获得了环路不同区域检测到氢气的最快特征时间。     

面向流屑角突变建模的切削状态参数经验公式的获得及应用

从提高流屑角突变模型的预测精度出发,建立了切削状态参数与3个切削控制参数之间关系的新经验公式。提出了一种通过迭代法准确设定有限元仿真软件刀-屑摩擦因数的方法,并通过直角切削Al6061-T6工件的有限元仿真试验,获得了一组不同切削控制参数组合条件下的切削状态参数数据。根据该数据拟合出剪切角φ、刀-屑摩擦角β、剪切应力τs关于刀具前角γ0、进给量f和切削速度v的经验公式,并通过一组直角切削试验,验证了所得经验公式的有效性。将新建经验公式应用于流屑角突变建模过程后,所得模型关于突变临界切削宽度的平均预测误差减小了27.2%。     

潮流能水平轴水轮机在剪切来流下的水动力分析

采用基于计算流体力学方法的全尺度数值模拟计算,建立了适用于潮流能水轮机模拟的剪切来流环境,通过数值计算结果,对潮流能水轮机随时间变化的宏观力和流场特征进行了系统分析,探索水轮机在复杂工况下的水动力特性规律。结果表明,水轮机整个叶轮的总体平均受力在剪切流工况中未受到明显影响; 单个叶片的瞬态轴向力系数和瞬态轴向扭矩系数在旋转周期内出现了明显的周期性变化,且周期性变化幅值随转速增大而增大; 非定常的瞬时轴向扭矩和力的周期性振荡容易引起单个叶片的结构性振动,可能对水轮机的机械结构造成影响。     

初始制动时预测湿式制动器热对流特性的积分方法

湿式制动器对重型车辆安全具有关键影响，以湿式制动器摩擦副间隙的冷却液压油（Automotive transmission fluid，ATF）为研究对象，考虑车辆初始制动阶段流体的黏性摩擦和层流流动特征，利用积分方法建立了摩擦副流体的非稳态能量方程，并获得了能同时满足轴向和径向边界条件的三维温度和热流密度显式解析表达式，通过简化动量方程和多项式分布假设也获得了径向速度和压力的理论解，与以往试验对比表明，压力和温度解析解与试验结果具有较好的一致性，理论模型有望推广用于液黏离合器等其他HVD装置的ATF速度场、温度场和热流密度场的理论预测。     

Improving basic relationships of pipe hydraulics

This communication presents the approaches set up for processing spinner flowmeter well logs in vertical wells with a single fluid phase, which is the most widely used in assessing wells productivity. These focus on improving the pipe hydraulics relationships so that the different fluid inputs throughout the well can be quantified. Since vertical flow inside wells varies with depth between laminar flows (very low Reynolds number, i.e. Re < 10³) and turbulent (Re > 4·10³) the aim has been to reduce the uncertainty in the transition interval. Starting from bibliographical data and/or well-known formulas for laminar and for turbulent flow, several continuous relationships have been developed for any regime: 1) an expression for the radial distribution of velocity inside the pipeline (velocity profile) was developed. 2) A relationship between the average velocity and the velocity at the axis (velocity factor) was created. 3) A third equation was generated to obtain the friction factor in smooth pipes (and starting from this, a new explicit equation for rough pipes). The purpose has been to have a set of empirical expressions of easy and continuous application for any regime, as an alternative to the use of computer simulations.     

An improved method to visualize two regions of interest synchronously in microfluidics

Multiphase flow in mini/micro channels has been widely studied for its potential in many industrial applications. The normal experimental method cannot capture two separate regions of interest (ROI) with a long distance synchronously for the limited field of views. In order to solve this problem, an improved experimental method is proposed and validated with experimental results. Prism groups are applied to reflect the two regions of interest to a very small shooting zone. Though the actual distance between the two regions is far, the reflected regions adjoin with each other on the top surface of the prisms. Thus, the two regions can be captured synchronously with one image using a small field of view. Two types of configurations with 4 prisms and 6 prisms are compared using gas-liquid and liquid-liquid experimental results. The resolution of the two configurations is similar, while the maximum amplification ratio is smaller for the latter configuration with 6 prisms. The first type is more suitable for experimental studies focusing on the formation and breakup of dispersed phases near two branches. The second configuration is recommended for cases focusing on the formation and fully developed hydraulic characteristics of the dispersed phase. The proposed method is very efficient for studies of hydraulic, heat and mass transfer characteristics of multiphase flows in mini/micro channels.     

Correlation of the leakage flow rate with pressure changes in a clearance-sealed piston prover

Leakage flow rate is one of the most important contributions to the measurement uncertainty when measuring small gas flow rates with a clearance-sealed piston prover. Our previous study has shown that the systematic effects related to the change of the gas viscosity can be successfully corrected, whereas the effects related to the reproducibility of the leakage flow rate are poorly understood. This paper focuses on the interpretation and correction of the reproducibility related effects by analysing experimentally identified variations of the leakage flow rate and the gas pressure in the inclined piston prover. Small changes of the leakage flow in the inclined piston prover indicate that the position of the piston relative to the cylinder remains approximately the same. The obtained relationship between the leakage flow rate and the gas pressure below the piston led to the pressure-based correction of the leakage flow rate.     

Environmental Control of Triplet Emission in Donor–Bridge–Acceptor Organometallics

Carbene‐metal‐amides (CMAs) are a promising family of donor–bridge–acceptor molecular charge‐transfer (CT) emitters for organic light‐emitting diodes. A universal approach is demonstrated to tune the energy of their CT emission. A blueshift of up to 210 meV is achievable in solid state via dilution in a polar host matrix. The origin of this shift has two components: constraint of thermally‐activated triplet diffusion, and electrostatic interactions between guest and polar host. This allows the emission of mid‐green CMA archetypes to be tuned to sky blue without chemical modifications. Monte‐Carlo simulations based on a Marcus‐type transfer integral successfully reproduce the concentration‐ and temperature‐dependent triplet diffusion process, revealing a substantial shift in the ensemble density of states in polar hosts. In gold‐bridged CMAs, this shift does not lead to a significant change in luminescence lifetime, thermal activation energy, reorganization energy, or intersystem crossing rate. These discoveries offer new insight into coupling between the singlet and triplet manifolds in CMA materials, revealing a dominant interaction between states of CT character. The same approach is employed using materials which have been chemically modified to alter the energy of their CT state directly, shifting the emission of sky‐blue chromophores into the practical blue range.     

多孔道底吹喷枪搅拌的数值模拟与强化机理分析

底吹富氧搅拌是熔池熔炼的一种关键强化技术，对品位低、杂质多的矿产资源具有很好适应性，底吹喷枪是其关键工艺设备。本文将数值模拟与数理统计相结合，建立了多孔道底吹喷枪强化搅拌的三维数学模型，并通过水力学模型实验对数学模型进行了验证。针对模型计算结果，以气泡上升时间、液体的气含率方差和平均湍流强度等为评价标准，对直管及多孔道底吹喷枪搅拌过程的混合均匀度进行对比研究。结果表明：多孔道喷枪喷吹方式在提高熔体搅动能的同时能使中上部熔体的混合更为充分，并在生产实践中取得了良好的应用效果。